Dispense Technology

High speed dispensing/coating robot DR-050

The DR-050 Robot is equipped with an X, Y and Z axis and can be upgraded with modules that have Z and Φ Axis. The 3 or 4 axis robots that you configure this way can handle up to 3 different modules.

•Attachments:•

DR-050 E

[Brochure DR-050 high speed dispensing/coating robot]

872 Kb

Dispensing and Coating 3+1 axis

The HC-100 Robot is equipped with an X, Y and Z axis.

The 3-Axis robots can handle up to 4 different tools. Tools can be dispense valves, spray valves grippers etc.
They have to be mounted onto a Z slide or a Z slide combined with a fixed tilt as the fourth axis. This combination has to be mounted onto an adapter for 1, 2, 3 or 4 valves. Tools and Valves can be configured outside the machine and can be put onto the robot as one unit. The 3 axis robot comes with a camera on the Z axis, computer with DIMASOFT user software, a base for adapter plates (for up to 4 tools), one electronic pressure sensor for the mains air supply, a sensor for detection of exhaust air and illumination inside the machine.

•Attachments:•

HC-100-200 D.pdf	[Brochure HC-100/200 Coater / Dispenser German]	847 Kb
HC-100-200 E.pdf	[Brochure HC-100/200 Coater / Dispenser English]	856 Kb

Dispensing and Coating 4+1 axis
The HC-200 Robot is equipped with an X, Y, Z and F axis.

The 4-Axis robots can handle up to 4 different tools. Tools can be dispense valves spray valves grippers etc.
They have to be mounted onto a valve mount. Tools and valves can be configured outside the machine and can be put onto the robot as one unit. The 4 axis robot comes with a camera on the Z axis, computer with DIMASOFT user software, a base for up to 4 valve mounts, one electronic pressure sensor for the mains air supply, a sensor for detection of exhaust air and illumination inside the machine.

•Attachments:•

HC-100-200 D.pdf	[Brochure HC-100 / 200 Coater / Dispenser German]	847 Kb
HC-100-200 E.pdf	[Brochure HC-100 / 200 Coater / Dispenser English]	856 Kb